UCC3888D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Frequency | 250kHz |
| Base Part Number | UCC3888 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Operating Supply Voltage | 9V |
| Input Voltage-Nom | 9V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 6V~9.3V |
| Quiescent Current | 1.2mA |
| Input Voltage (Min) | 6.6V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Rise Time | 35ns |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Short Circuit |
| Max Duty Cycle | 55 % |
| Switching Frequency | 250kHz |
| Duty Cycle | 7.6% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 8.4V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3888D Overview
8-SOIC (0.154, 3.90mm Width) is the package in which the ac to dc converter is embedded.In Tube case, the ac dc converter is available.The AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of 0°C~70°C TA °C in order to achieve its full performance.This AC DC converter employs SWITCHING CONTROLLER analog IC type.As long as the supply voltage (Vcc/Vdd) is within the range of 6V~9.3V , the AC/DC converter may be used.As a result, it has had 8 terminations.On this ac/dc converter, there are 8 pins.There are 8 pins in the ac-dc converter.The ac dc converters are suitable for mounting by Surface Mount .The UCC3888 family can be used to search for similar acdc converters.A total of 1 outputs need to be run.AC to DC converter is included in Switching Regulator or Controllers .AC to DC converter is set to 200mA for the output current.Its output voltage is5V .The power AC DC is capable of high efficiency when operated at a frequency of 250kHz .The interface IC conducts when the supply voltage is 9V .In the state of 1.2mA , AC to DC converter consumes quiescent current.
UCC3888D Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
With 8 pins
Output Current at 200mA
Operating Supply Voltage at the range of 9V
UCC3888D Applications
There are a lot of Texas Instruments UCC3888D AC DC Converters applications.
- Automotive Clusters
- Standby power
- AC?DC USB chargers for Cell Phones
- Vacuum Cleaner
- Low-Voltage I/O System Power
- Appliance Power Supplies
- Battery chargers for smart phones
- Portable audio
- Battery chargers for cellular phones
- Home Appliance Applications
