UCC3888NG4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 250kHz |
| Base Part Number | UCC3888 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Operating Supply Voltage | 9V |
| Input Voltage-Nom | 9V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 6V~9.3V |
| Input Voltage (Min) | 6.6V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Rise Time | 35ns |
| Fall Time (Typ) | 30 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Short Circuit |
| Max Duty Cycle | 55 % |
| Switching Frequency | 250kHz |
| Duty Cycle | 7.6% |
| Output Isolation | Non-Isolated |
| Voltage - Start Up | 8.4V |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC3888NG4 Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm) contains the ac to dc converter.Tube case is available for the ac dc converter.Through Hole mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of 0°C~70°C TA °C in order to achieve its full performance.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.Supply voltage (Vcc/Vdd) does not need to exceed 6V~9.3V .In total, it has 8 terminations.The ac/dc converter has 8 pins.There are 8 pins in total.Through Hole is the recommended mounting method for the ac dc converters.You can search similar acdc converters based on UCC3888 family.There are 1 outputs to be processed.AC to DC converter is included in Switching Regulator or Controllers .The output current is set to 200mA .It produces a voltage of 5V .When operating at a frequency of 250kHz , AC to DC converter is capable of reaching high efficiency.Interfacing ICs conduct when there is 9V supply voltage.
UCC3888NG4 Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 200mA
Operating Supply Voltage at the range of 9V
UCC3888NG4 Applications
There are a lot of Texas Instruments UCC3888NG4 AC DC Converters applications.
- Universal input AC/DC adapters (15W - 45W)
- Switching AC-DC Adapter
- Battery chargers for cellular phones
- Battery chargers for mobile devices with touchpad display
- RCC SMPS
- Home Appliance Applications
- 3.3V power supplies
- Adapter/Charger for Cell
- AC/DC LED Driver applications
- Adapters for Handheld Electronics
