Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm) |
Number of Pins |
8 |
Weight |
523.190449mg |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
Not Applicable |
Number of Terminations |
8 |
Termination |
Through Hole |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Switching Regulator or Controllers |
Technology |
BICMOS |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Frequency |
100kHz |
Base Part Number |
UCC3889 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
17.5V |
Operating Supply Voltage |
9V |
Input Voltage-Nom |
9V |
Analog IC - Other Type |
SWITCHING CONTROLLER |
Operating Supply Current |
1.2mA |
Output Current |
100mA |
Voltage - Supply (Vcc/Vdd) |
6.3V~9.3V |
Quiescent Current |
1.2mA |
Max Output Voltage |
19.5V |
Topology |
Flyback |
Min Input Voltage |
80V |
Control Mode |
VOLTAGE-MODE |
Max Input Voltage |
265V |
Rise Time |
35ns |
Fall Time (Typ) |
30 ns |
Nominal Input Voltage |
9.3V |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
No |
Fault Protection |
Short Circuit |
Max Duty Cycle |
55 % |
Switching Frequency |
250kHz |
Duty Cycle |
55 % |
Output Isolation |
Non-Isolated |
Voltage - Start Up |
8.4V |
Min Input Voltage (AC) |
80V |
Max Input Voltage (AC) |
265V |
Height |
5.08mm |
Length |
9.81mm |
Width |
6.35mm |
Thickness |
3.9mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
UCC3889N Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm) package.The AC/DC power converter is available in Tube .A AC/DC converter of this type is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of 0°C~70°C TA °C so that it can deliver its performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.Vcc/Vdd can be used within the range of 6.3V~9.3V supply voltage.There are a total of 8 terminations in it.The ac/dc converter has 8 pins.There are a total of 8 pins on the ac-dc converter.The ac dc converters are suitable for mounting by Through Hole .If you select the UCC3889 family, you will be able to search for similar acdc converters.There are 1 outputs to run.The following ac to dc conversions are contained in Switching Regulator or Controllers .100mA is set as the output current.Its output voltage is17.5V .A high efficiency can be achieved by operating at a frequency of 100kHz .You can read the standard for REACH SVHC at: No SVHC .An input voltage of 265V is available for powering the AC to DC converter.It is possible to operate the AC to DC inverter with an input voltage that is less than 80V V.When the supply voltage is 9V , the interface IC may conduct.A AC to DC power converter's input voltage (AC) should not exceed 265V .A quiescent current of 0 volts is consumed by the AC to DC power supply.
UCC3889N Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 100mA
Operating Supply Voltage at the range of 9V
UCC3889N Applications
There are a lot of Texas Instruments UCC3889N AC DC Converters applications.
- Air Conditioning
- Adaptors for DSCs
- Adapter for ADSL
- Power adapters for network devices
- Adapter/Charger for Cordless Phones
- Z-Wave
- Home appliances
- 3.3V power supplies
- Universal input AC/DC adapters (15W - 45W)
- Power adapters for monitors