UCC3895DWTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 569.003279mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 1MHz |
| Base Part Number | UCC3895 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 250mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16.5V |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 10V |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 16.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | PHASE-SHIFT |
| Internal Switch(s) | No |
| Max Duty Cycle | 100 % |
| Duty Cycle | 100% |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3895DWTR Overview
There is a ac to dc converter embedded in package 20-SOIC (0.295, 7.50mm Width) .Tape & Reel (TR) case is available for the ac dc converter.Surface Mount mounts this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -55°C~150°C TJ °C.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.This AC/DC converter is suitable for operation in the range of 10V~16.5V supply voltage (Vcc/Vdd).There are a total of 20 terminations.Approximately 20 pins are present on the ac/dc converter.The pins of the ac-dc converter count up to 20 .Surface Mount is a suitable mounting point for the ac dc converters.Similar acdc converters can be found using the UCC3895 family.A total of 4 outputs are to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .There is 10mA output current set.There is 250mV voltage output from it.This power AC DC is capable of reaching high efficiencies when operating at a frequency of 1MHz .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 16.5V .You can read the standard for REACH SVHC at: No SVHC .As a result of using this ACDC converter, ALSO OPERATES IN CURRENT MODE can also be detected.It is imperative that this AC to DC converter is set to 12V at all times.
UCC3895DWTR Features
Packaged with 20-SOIC (0.295, 7.50mm Width)
With 20 pins
Output Current at 10mA
UCC3895DWTR Applications
There are a lot of Texas Instruments UCC3895DWTR AC DC Converters applications.
- WiFi Wireless
- Adapter for ADSL
- Z-Wave
- Dimmers
- Replaces linear transformers
- AC/DC Adaptors/Chargers for E-books
- Standby Power Supplies
- Battery chargers for cellular phones
- Auxiliary Power Supplies
- Automotive Clusters
