UCC3895DWTRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 569.003279mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 1MHz |
| Base Part Number | UCC3895 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 250mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16.5V |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 10V |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 16.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | PHASE-SHIFT |
| Internal Switch(s) | No |
| Max Duty Cycle | 100 % |
| Duty Cycle | 100% |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3895DWTRG4 Overview
In the package 24-SOIC (0.295, 7.50mm Width) , the ac to dc converter is embedded.In Tape & Reel (TR) case, the ac dc converter is available.As you can see, this AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -55°C~150°C TJ degrees Celsius.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.As long as the supply voltage (Vcc/Vdd) is within the range of 10V~16.5V , the AC/DC converter may be used.A total of 20 terminations have been recorded.The ac/dc converter has a total of 20 pins.There are 20 pins in the ac-dc converter.The ac dc converters are suitable for mounting by Surface Mount .You can search similar acdc converters based on UCC3895 family.AC to DC converter is necessary to run 4 outputs.The following ac to dc conversions are contained in Switching Regulator or Controllers .AC to DC converter is set to 10mA for the output current.In this AC to DC transformer, the output voltage is 250mV .A high efficiency is achieved when operating at a frequency of 1MHz .It is possible to ensure a maximum value of 16.5V for the input voltage using a unique technique.Using this ACDC converter, it is also possible to identify ALSO OPERATES IN CURRENT MODE .Remember that this AC to DC converter should be set to 12V at all times.
UCC3895DWTRG4 Features
Packaged with 24-SOIC (0.295, 7.50mm Width)
With 20 pins
Output Current at 10mA
UCC3895DWTRG4 Applications
There are a lot of Texas Instruments UCC3895DWTRG4 AC DC Converters applications.
- Z-Wave
- Battery chargers for media tablets
- Utility meters
- Consumer electronics
- Power Adaptors
- Vacuum Cleaner
- Linear Adapter Replacements
- Dimmers
- Replaces linear transformers
- IoT Applications
