UCC3895N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 20 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1W |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC3895 |
| Pin Count | 20 |
| Output Voltage | 250mV |
| Output Type | Voltage |
| Max Output Current | 100mA |
| Input Voltage-Nom | 12V |
| Number of Channels | 4 |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 5mA |
| Power Dissipation | 1W |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16.5V |
| Control Features | Frequency Control, Soft Start, Sync |
| Topology | Full-Bridge |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Nominal Input Voltage | 12V |
| Switcher Configuration | PHASE-SHIFT |
| Internal Switch(s) | No |
| Max Duty Cycle | 100 % |
| Duty Cycle | 100% |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3895N Overview
This ac to dc converter is included in the package 20-DIP (0.300, 7.62mm) .You can get it in AC/DC power converter Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -55°C~150°C TJ °C to deliver its optimal performance.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.Vcc/Vdd can be used within the range of 10V~16.5V supply voltage.In total, it has 20 terminations.The ac/dc converter has a total of 20 pins.The pins of the ac-dc converter count up to 20 .There are no problem mounting the ac dc converters by Through Hole .Similar acdc converters can be found using the UCC3895 family.The ac to dc conversions are contained in Switching Regulator or Controllers .The output current is set to 100mA .It produces a voltage of 250mV .AC to DC converter is able to reach high efficiency when its frequency is 1MHz .In the following link, you will find the REACH SVHC standard: No SVHC .As a result of using this ACDC converter, ALSO OPERATES IN CURRENT MODE can also be detected.It is important to keep this AC to DC converter set to 12V .We currently have 4 channels available.It is configured with a Voltage output.
UCC3895N Features
Packaged with 20-DIP (0.300, 7.62mm)
With 20 pins
Output Current at 100mA
With 4 channels on it
Output Type : Voltage
UCC3895N Applications
There are a lot of Texas Instruments UCC3895N AC DC Converters applications.
- Lighting controls
- Off--line Battery Charger
- Shaver Charger
- AC-DC Output Power Conversion Applications
- IoT Applications
- Tablets
- AC/DC Adaptors/Chargers for Cordless Phone
- RCC SMPS
- USB-PD 2.0
- Set -Top Box (STB) Power Supply
