UCC38C41DGKG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | VSSOP |
| Number of Pins | 8 |
| Weight | 25.996513mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 15V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 18V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 200mA |
| Voltage - Output | 18V |
| Topology | Flyback, Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 18V |
| Switcher Configuration | SINGLE |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 50 % |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC38C41DGKG4 Overview
Capsuled in the VSSOP package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. Rail/Tube is the solid enclosure in which PMIC is packaged. The switching controller can be switched at 1MHz. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of 8 terminations are available in dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. There are 8 pins on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sSwitching controller operates at 1MHz Hz. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN CURRENT MODE. The temperature should be at least 0°C. DC regulator should run at a temperature 70°C higher than 70°C. As a whole, there are 1 function(s) in the switch converters. It is designed to have voltage regulators switchings with 8 pins. It is possible to set the input voltage to 18V for nominal working status. Input values of 200mA make it ideal for switching controllers. As a result of normalworking processes, a voltage of 18V is output. Voltage is rated 18V for maximum supply.
UCC38C41DGKG4 Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE
UCC38C41DGKG4 Applications
There are a lot of Texas Instruments UCC38C41DGKG4 DC to DC converter applications.
- Flexible manufacturing cells
- Overvoltage protection circuits in TV sets
- Television equipment
- Electrical distribution systems
- Window air conditioners
- Communication system
- Surge protection circuits
- Servo drive system
- Energy management systems
- Low output voltage switching power supply circuits
