UCC38C42P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | 0°C~70°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 1MHz |
| Base Part Number | UCC38C42 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 18V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Nominal Supply Current | 2.3mA |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 9V~18V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Nominal Input Voltage | 18V |
| Switcher Configuration | BUCK-BOOST |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 96% |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC38C42P Overview
In the 8-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. 1 outputs can be generated with the dc motor controller. An enclosure of Tube is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. The supply and operating voltage of the dc control are 9V~18V. Worked in an dc switcher with a 0°C~70°C TJ rating. The switching controller can be switched at Up to 1MHz. The Through Hole allows it to be used for dc dc regulator in general. Frequency Control is used for efficient switching control in the dcdc regulator. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. A variety of 8 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. A search for "UCC38C42" will reveal other relevant dc to dc converter ics. Pins number 8 of switching converter in total. Switching converter is a special type of Switching Regulator or Controllers. DC regulator outputs 18V voltage according to the test statistics. You should note that the dc dc regulator's usual output current is 200mA. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. This Through Hole makes DC switcher suitable for most prototypes and applications. Switching controllers work at 1MHz Hz. This value is ALSO OPERATES IN CURRENT MODE so that DC to DC voltage regulator better serves the purpose. Input voltage can be set to 18V for nominal working status. There is 2.3mA nominal current supply for this the controllers dc.
UCC38C42P Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE
UCC38C42P Applications
There are a lot of Texas Instruments UCC38C42P DC to DC converter applications.
- Energy management systems
- Various precision measuring detectors
- Flaw detection equipment
- Servo drive system
- Printing equipment
- CNC system
- Refrigerators of central air conditioners
- Correction machines
- Electrical power transmission
- Milling machines
