UCC3919DTRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | UVLO |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Voltage - Supply | 3V~8V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Depth | 4mm |
| Base Part Number | UCC3919 |
| Pin Count | 16 |
| Output Voltage | 14V |
| Supply Voltage-Max (Vsup) | 8V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.5mA |
| Max Supply Current | 1.5mA |
| Adjustable Threshold | YES |
| Current - Supply | 1mA |
| Nominal Input Voltage | 8V |
| Internal Switch(s) | No |
| Programmable Features | Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault |
| Feature Pins | CAP, CT, /FLT, IBIAS, IMAX, L/R, PL, /SD |
| Length | 10mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC3919DTRG4 Overview
Package 16-SOIC (0.154, 3.90mm Width) includes it.In the current state, 1 channels are accessible.A Tape & Reel (TR)-shaped package holds it.The 16 terminations total to three.The terminal position of the device is DUAL.The device consists of a total of 16 pins.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 5V.It's?set?up?in?the?way?of?Surface Mount.Electrical components classified as Hot Swap Controller are referred to as Hot Swap Controller components.A reliable operation requires the temperature to be set to 0°C~70°C.A General Purpose application is available for the device.The article is featured in UVLO.If the power source is 3V~8VV, it should work fine.There are numbers in the UCC3919 family that include it.This device uses 16 pins for operation.Power Management Circuits contains this gadget on its own.Hot-swappable device has Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault programmable features.This is the current supply of 1mA.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 3V in order to maintain normal operation.Hot-swappable device is set to 8V (maximum supply voltage).Part 5V is associated with power supplies.Its maximum current requirement is 1.5mA.14V output voltage enables high efficiency.
UCC3919DTRG4 Features
The terminal position of 16
Features of UVLO
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault
Output voltage of 14V
UCC3919DTRG4 Applications
There are a lot of Texas Instruments UCC3919DTRG4 hot swap controllers applications.
- Server backplane system
- Base station
- Current limit and current foldback limit functions
- Supply voltage monitoring
- Automatic restart after load failure
- Modern analog communication
- ISDN system
- Microcontrollers
- Short circuit protection
- Overvoltage protection
