UCC39421PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CONFIGURABLE PEAK CURRENT MODE; PROGRAMMABLE PFM TECHNIQUE |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 2MHz |
| Base Part Number | UCC39421 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 8V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 8V |
| Input Voltage-Nom | 3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 1.8V~8V |
| Control Features | Enable, Frequency Control, Low Battery, Reset |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 150kHz~1.2MHz |
| Input Voltage (Max) | 8V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 88% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC39421PW Overview
It comes in the 16-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. For 1 outputs, the dc motor controller is appropriate. Tube solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 1.8V~8V. Qualified to work in an dc switcher with 0°C~70°C TA. A switching controller such as this can switch at a value of 150kHz~1.2MHz . The Surface Mount allows it to be used for dc dc regulator in general. Enable, Frequency Control, Low Battery, Reset is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of terminations with 16 of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 3V. Searching "UCC39421" will return other relevant dc to dc converter ics. 16 pins are on switching converter. DC regulator outputs 8V voltage according to the test statistics. This dc to dc regulator accepts only 8V input voltage at most. normally, the dc dc regulator's output current is 1A, which you should keep in mind when starting a project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere is 2MHz frequency setting on the switching controller. For better satisfaction, the value of DC to DC voltage regulator is CONFIGURABLE PEAK CURRENT MODE; PROGRAMMABLE PFM TECHNIQUE. To run the voltage regulator dc to dc safely and reliably, users should apply 8V to the voltage regulator dc to dc.
UCC39421PW Features
Transistor Driver Outputs
Switching Frequency: 150kHz~1.2MHz
Enable, Frequency Control, Low Battery, Reset
PULSE WIDTH MODULATION
Frequency: 2MHz
CONFIGURABLE PEAK CURRENT MODE; PROGRAMMABLE PFM TECHNIQUE
UCC39421PW Applications
There are a lot of Texas Instruments UCC39421PW DC to DC converter applications.
- Industrial robots
- Imported equipment
- Surface processing equipment
- Analog precision reference circuits
- Balance equipment
- PSRR circuits
- Surge protection circuits
- Arc suppression circuits
- Low output voltage switching power supply circuits
- Direct power supply system
