UCC3972N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | CCFL Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~20V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 2.54mm |
| Frequency | 80kHz~160kHz |
| Base Part Number | UCC3972 |
| Pin Count | 8 |
| Operating Supply Voltage | 9V |
| Input Voltage-Nom | 12V |
| Power Supplies | 12V |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 7mA |
| Output Current | 100mA |
| Input Voltage (Min) | 4.5V |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | CURRENT FED PUSH-PULL |
| Dimming | No |
| Height | 4.57mm |
| Length | 9.81mm |
| Width | 6.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC3972N Overview
Materials used in packaging are those of Tube.There is no doubt that electronics manufacturers are aware of the 8-DIP (0.300, 7.62mm)'s low package cost.Through Hole mounts it on the PCB.Standard grade applications qualify it as Type CCFL Controller.It ought to function with a voltage supply of 4.5V~20V.The 0°C~70°C setting should always be used.A 80kHz~160kHz frequency can still be operated accurately.One of the best parts of the device is the UCC3972-axis.A 8 termination is used for its construction.It runs in 1 mode.A 7mA supply current is set for the device.It is the same pin number 8 for this component.Total pins in the sum are 8.Power is always provided by a source of 12V to the component.Subcategory Switching Regulator or Controllers can be assigned to the item.A Through Hole-direction mount is used.When this case is used, the output current is set to 100mA.It can be operated with a minimum input voltage of 4.5V.An input voltage maximum of 25V is available.The device has 12V supplies.9V voltage is required for its operation.
UCC3972N Features
Mounting type of Through Hole
Supply voltage of 12V
Switching Regulator or Controllers subcategory
Operating supply voltage of 9V
UCC3972N Applications
There are a lot of Texas Instruments UCC3972N Lighting Controllers applications.
- UPS buffering
- Lighting ballast
- To reduce power noise & signal noise
- Decoupling or bypassing
- Coupling or blocking
- Power factor correction (PFC)
- Spot welding
- Smoothing
- Motor start
- Server motherboards
