banner_page

UCC3973NG4

12V 2.54mm PMIC UCC3973 8 Pin 80kHz~160kHz 12V 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-UCC3973NG4
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 124
  • Description: 12V 2.54mm PMIC UCC3973 8 Pin 80kHz~160kHz 12V 8-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Weight 523.190449mg
Operating Temperature 0°C~70°C
Packaging Tube
Part Status Obsolete
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Type CCFL Controller
Subcategory Switching Regulator or Controllers
Technology BICMOS
Voltage - Supply 4.5V~20V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 12V
Terminal Pitch 2.54mm
Frequency 80kHz~160kHz
Base Part Number UCC3973
Pin Count 8
Input Voltage-Nom 12V
Power Supplies 12V
Operating Supply Current 7mA
Nominal Supply Current 1mA
Output Current 100mA
Input Voltage (Min) 4.5V
Control Mode CURRENT-MODE
Input Voltage (Max) 25V
Control Technique PULSE WIDTH MODULATION
Switcher Configuration CURRENT FED PUSH-PULL
Dimming No
Width 7.62mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

UCC3973NG4 Overview


As per Tube's specifications, the package is designed accordingly.A low package cost makes the 8-DIP (0.300, 7.62mm) a popular choice among electronic manufacturers.PCB Through Hole is used to mount it.As a standard grade, it's referred to as Type CCFL Controller.An appropriate power supply voltage ensures that it operates normally.0°C~70°C should always be the default setting.It is still accurate at 80kHz~160kHz frequency.Its best part contains a number of UCC3973s.The 8-terminations are built into it.Functions are handled by the device in 1 mode.There is a 7mA setting on the device's supply current.It is the same pin number 8 for this component.In total, it has 8 pins.A constant source of 12V powers the component.There is a Switching Regulator or Controllers Subcategory for this item.In this case, 100mA is set as the output current.It can be operated with a minimum input voltage of 4.5V.It is possible to input a voltage maximum of 25V.Supply 12V is present on the device.

UCC3973NG4 Features


Mounting type of Through Hole
Supply voltage of 12V
Switching Regulator or Controllers subcategory

UCC3973NG4 Applications


There are a lot of Texas Instruments UCC3973NG4 Lighting Controllers applications.

  • Lighting ballast
  • DC buffering
  • Smoothing
  • UPS buffering
  • To reduce power noise & signal noise
  • Signal decoupling & power bypass
  • Coupling or blocking
  • DC link
  • To enhance power efficiency
  • Motor start

Write a review

Note: HTML is not translated!
    Bad           Good