UCC5614PWPTRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 9 |
| Type | SCSI |
| Resistance | 110Ohm |
| Subcategory | Bus Terminators |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC5614 |
| Pin Count | 24 |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 3/5V |
| Nominal Supply Current | 218mA |
| Differential Output | NO |
| Number of Signal Lines | 9 |
| Pull-up Resistance-Nom | 110Ohm |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC5614PWPTRG4 Overview
Termination with a 9 device, which matches the transmission line's characteristic impedance, is considered a 9 termination. Because of the low cost of its packages, the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad is well known in the electronic industry. Tape & Reel (TR)'s packaging is made of the same materials. Mounting it on a PCB is done with Surface Mount. A maximum operating temperature of 0°C~70°C should not be exceeded. This material is SCSI-qualified for use in standard applications. Normal operation is ensured with a 2.7V~5.25V Supply Voltage. With Base Part Number UCC5614, you can find related parts. There are also 24 pins available for specific purposes. In general, a signal line is defined as a line devoted solely to transmitting signals or intelligence, whether it's for purposes of public or private communication. Keeping the supply voltage at 3.3V is essential for high efficiency. On it is a Surface Mount-mount. A subcategory Bus Terminators is appropriate for it. 24 pins, which are pronged contacts, are used in computers and other communications devices. It is necessary to use 3/5V Power Supplies to operate this system. Here is the resistance of this electrical device (110Ohm). 5.25V needs a continuous supply current in order to function properly.
UCC5614PWPTRG4 Features
9 terminations
Tape & Reel (TR) package
UCC5614 family
24 pin count
9 signal lines
24 pins
3/5V power supplies
UCC5614PWPTRG4 Applications
There are a lot of Texas Instruments UCC5614PWPTRG4 Signal Terminators applications.
- personal computers
- Telecommunication Equipment
- Disk array (RAID)
- Data Networking
- workstations
- Remote input module
- laser printers
- mainframes
- tape drives
- Notebooks
