UCC5618DWPG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 792.000628mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Type | SCSI |
| Resistance | 110Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Bus Terminators |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Terminal Pitch | 1.27mm |
| Base Part Number | UCC5618 |
| Pin Count | 28 |
| Power Supplies | 4.75V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 440mA |
| Nominal Supply Current | 440mA |
| Max Supply Current | 440mA |
| Differential Output | NO |
| Number of Signal Lines | 18 |
| Pull-up Resistance-Nom | 110Ohm |
| Height | 2.35mm |
| Length | 18mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC5618DWPG4 Overview
A 18 termination consists of terminating transmission lines with a device matching the line's characteristic impedance. As a result of its low package cost, the 28-SOIC (0.295, 7.50mm Width) is well known in the electronic industry. Material choices are based on Tube's. Using Surface Mount, you mount it on a PCB. In order to prevent overheating, the Operating Temperature should not exceed 0°C~70°C degrees Celsius. The material meets SCSI-qualification for standard applications. For finding related parts, you can use Base Part Number UCC5618. Specific uses are provided with 28 pins. In terms of 18 signal lines, these are lines devoted exclusively to the transmission of signals or intelligence, either public or private. Optimal efficiency requires a supply voltage of 4.75V. On it there is a Surface Mount-mount. As part of Subcategory Bus Terminators, it is included. The pronged contacts used in computers and other communication devices are called 28 pins. In order to operate, 4.75V Power Supplies are required. Here is the resistance of this electrical device: 110Ohm (Ω). This device is a great choice for a wide variety of applications due to its ability to operate at voltages of 440mA. With a minimal supply voltage of 4V, the system can run. When 5.25V is maximal, it operates at maximum voltage. In its operation, maximum current reaches 440mA.
UCC5618DWPG4 Features
18 terminations
Tube package
UCC5618 family
28 pin count
18 signal lines
28 pins
4.75V power supplies
UCC5618DWPG4 Applications
There are a lot of Texas Instruments UCC5618DWPG4 Signal Terminators applications.
- SCSI cable
- personal computers
- Notebooks
- Storage area networks (SAN)
- High speed protected termination for digital input with serialized SPI output
- laser printers
- Programmable logic controller and remote input modules
- Data Routers
- Disk array (RAID)
- Compact disk drives
