UCC5618DWPTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 792.000628mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Type | SCSI |
| Resistance | 110Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Bus Terminators |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Terminal Pitch | 1.27mm |
| Base Part Number | UCC5618 |
| Pin Count | 28 |
| Power Supplies | 4.75V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 440mA |
| Nominal Supply Current | 440mA |
| Differential Output | NO |
| Number of Signal Lines | 18 |
| Pull-up Resistance-Nom | 110Ohm |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC5618DWPTR Overview
A transmission line may also have 18 terminations, which are made using devices matched to its characteristic impedance. 28-SOIC (0.295, 7.50mm Width) is well known for its low package cost in the electronics industry. Tape & Reel (TR)'s packaging follows his material specifications. It is mounted in the way of Surface Mount. A maximum operating temperature of 0°C~70°C should not be exceeded. It is a SCSI-qualified material for standard applications. If you are looking for related parts, you can use Base Part Number UCC5618. There are a number of 28 pins included for specific applications. In terms of 18 signal lines, these are lines devoted exclusively to the transmission of signals or intelligence, either public or private. If you want the supply voltage to be as high as possible, you should maintain it at 4.75V. On the back is a Surface Mount-mount. This falls under Subcategory Bus Terminators. It is common for computers and other communication devices to use pronged contacts, called 28 pins. The 4.75V Power Supplies are necessary for the operation of the system. Here, the resistance is 110Ohm (Ω). As it can operate on a wide range of supply voltages, it is a great choice for a variety of applications. It runs on a minimal voltage of 4V. A voltage of maximum is achieved when 5.25V is maximal.
UCC5618DWPTR Features
18 terminations
Tape & Reel (TR) package
UCC5618 family
28 pin count
18 signal lines
28 pins
4.75V power supplies
UCC5618DWPTR Applications
There are a lot of Texas Instruments UCC5618DWPTR Signal Terminators applications.
- Programmable logic controller
- mainframes
- ESD protection and termination of USB downstream ports downstream ports
- CSU and DSU
- Compact disk drives
- High speed protected termination for digital input with serialized SPI output
- Optical disk drives
- workstations
- Notebooks
- Programmable logic controller and remote input modules
