UCC5619MWP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSOP (0.295, 7.50mm Width) |
| Number of Pins | 36 |
| Weight | 723.394782mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 27 |
| ECCN Code | EAR99 |
| Type | SCSI |
| Resistance | 110Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Bus Terminators |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.75V |
| Terminal Pitch | 0.8mm |
| Base Part Number | UCC5619 |
| Pin Count | 36 |
| Power Supplies | 4.75V |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 65mA |
| Nominal Supply Current | 650mA |
| Differential Output | NO |
| Number of Signal Lines | 27 |
| Pull-up Resistance-Nom | 110Ohm |
| Height Seated (Max) | 2.64mm |
| Length | 15.385mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC5619MWP Overview
A 27 termination consists of terminating transmission lines with a device matching the line's characteristic impedance. 36-BSOP (0.295, 7.50mm Width) is well known for its low package cost in the electronics industry. Tube's packaging follows her materials. This is done using Surface Mount for mounting on a PCB. A maximum operating temperature of 0°C~70°C should not be exceeded. The material qualifies for standard applications as a SCSI-qualified material. Using Base Part Number UCC5619 will allow you to find related parts. A specific purpose is served by the 36 pins. In terms of 27 signal lines, these are lines devoted exclusively to the transmission of signals or intelligence, either public or private. For high efficiency, it is recommended that the supply voltage is maintained at 4.75V. There is a Surface Mount-mount on it. This falls under Subcategory Bus Terminators. 36 pins, which are pronged contacts, are used in computers and other communications devices. It is necessary to have 4.75V Power Supplies in order for the system to operate. Here is the resistance of this electrical device (110Ohm). With its ability to operate on supply voltages of 65mA, this device is ideal for a wide range of applications. It runs on a minimal voltage of 4V. A voltage of maximum is achieved when 7V is maximal.
UCC5619MWP Features
27 terminations
Tube package
UCC5619 family
36 pin count
27 signal lines
36 pins
4.75V power supplies
UCC5619MWP Applications
There are a lot of Texas Instruments UCC5619MWP Signal Terminators applications.
- High speed protected termination for digital input with serialized SPI output
- laser printers
- personal computers
- SCSI cable
- tape drives
- CD-ROM drives
- Data Switches
- Optical disk drives
- Telecommunication Equipment
- Network attached storage (NAS)
