UCC5672PWPG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| Termination | SCSI |
| Resistance | 105Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Bus Terminators |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 28 |
| Power Supplies | 3/5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 2.7V |
| Operating Supply Current | 35mA |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Number of Bits | 9 |
| Differential Output | YES |
| Number of Signal Lines | 9 |
| Pull-up Resistance-Nom | 105Ohm |
| Height | 1.15mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
UCC5672PWPG4 Overview
It is possible to terminate a transmission line with a device matching the impedance of the line, which is known as 28 termination. A well-known feature of the TSSOP is its low packaging cost. For specific purposes, 28 pins are included. A 9 signal line is an exclusive line to transmit signals or intelligence. 9 lines can be public or private. It is important to maintain the supply voltage at 3.3V in order to achieve high efficiency. It is attached to a Surface Mount-mount. This item belongs to Subcategory Bus Terminators. 28 pins, which are pronged contacts, are used in computers and other communications devices. Power Supplies are not required to operate the device. This electrical device has a resistance 105Ohm (Ω). As it can operate on a wide range of supply voltages, it is a great choice for a variety of applications. It runs on a minimal voltage of 2.7V. The voltage is at its maximum when 5.25V is maximal. As a result, 0°C should be warmer than when the device is operating. Due to this, it operates at the maximum operating temperature of 70°C. Upon reaching 35mA, the maximum current is supplied to it for operation.
UCC5672PWPG4 Features
28 terminations
28 pin count
9 signal lines
28 pins
3/5V power supplies
UCC5672PWPG4 Applications
There are a lot of Texas Instruments UCC5672PWPG4 Signal Terminators applications.
- CD-ROM drives
- ESD protection and termination of USB downstream ports downstream ports
- Set-top boxes
- CSU and DSU
- Data Switches
- Programmable logic controller and remote input modules
- laser printers
- PCI Cards
- Data Routers
- Notebooks
