UCC5673PWP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 28 |
| Weight | 117.508773mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | SCSI, LVD, SE |
| Resistance | 105Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Terminators |
| Voltage - Supply | 2.7V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC5673 |
| Pin Count | 28 |
| Power Supplies | 3/5V |
| Operating Supply Current | 23mA |
| Nominal Supply Current | 35mA |
| Differential Output | YES |
| Number of Drivers | 1 |
| Number of Signal Lines | 9 |
| Pull-up Resistance-Nom | 105Ohm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
UCC5673PWP Overview
An example of a 9 termination would be one in which the characteristic impedance of the transmission line is matched to the device terminating the transmission line. A well-known feature of the 28-PowerTSSOP (0.173, 4.40mm Width) is its low packaging cost. Materials are taken from Tube's packaging. On Surface Mount, a PCB can be mounted. It is recommended that the Operating Temperature not exceed 0°C~70°C. This is a standard-qualified material. The 2.7V~5.25V Supply Voltage ensures normal operation. A Base Part Number UCC5673 can help you find related parts. There are specific uses for the 28 pins. Signal lines, or 9 lines, are those dedicated to the transmission of signals or intelligence while being public or private. Maintaining a constant supply voltage is key to high efficiency. On the back is a Surface Mount-mount. A subcategory Bus Terminators is appropriate for it. There are pronged contacts on 28 pins, which are used in computers and other communication devices. A 3/5V Power Supply is required to operate the system. This electrical device has a resistance of 105Ohm (Ω). As the device can operate at supply voltages of 23mA, it is suitable for a wide range of applications. When the part is in the field, it can have up to 1 eligible receivers/drivers.
UCC5673PWP Features
9 terminations
Tube package
UCC5673 family
28 pin count
9 signal lines
28 pins
3/5V power supplies
UCC5673PWP Applications
There are a lot of Texas Instruments UCC5673PWP Signal Terminators applications.
- USB hubs
- CSU and DSU
- tape drives
- SCSI cable
- Disk array (RAID)
- Compact disk drives
- laser printers
- Desktop PCs
- Network attached storage (NAS)
- Programmable logic controller and remote input modules
