UCD7100PWPRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Voltage - Supply | 4.25V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Base Part Number | UCD7100 |
| Pin Count | 14 |
| Output Current | 4A |
| Supply Current-Max | 200mA |
| Input Type | Non-Inverting |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Input Characteristics | STANDARD |
| Rise / Fall Time (Typ) | 10ns 10ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1.16V 2.08V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCD7100PWPRG4 Overview
The 14-PowerTSSOP (0.173, 4.40mm Width) package offers greater flexibility.The packaging method is indicated by Tape & Reel (TR).Gate drivers incorporates wGate driversh 1 drivers for Gate driverss configuration.The device is mounted in the direction of Surface Mount.In the absence of a 4.25V~15V supply voltage, it can demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~105°C TJ.Mosfet driver accepts input of type Non-Inverting.It's configured with 14 terminations.There are various parts that can be found under its base part number UCD7100.Devices are mounted by Surface Mount.During design, it is configured with 14 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.This subcategory of MOSFET Drivers has a number of useful electronic components.The board has 14 component pins.The output current can be set to 4A.Its input is characterized by STANDARD.When operating, the supply current cannot exceed 200mA.
UCD7100PWPRG4 Features
Embedded in the Tape & Reel (TR) package
1 drivers
Employing a gate type of N-Channel MOSFET
14 pins
UCD7100PWPRG4 Applications
There are a lot of Texas Instruments UCD7100PWPRG4 gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Motor Control
- RGB applications
- Isolated switch mode power supplies (SMPS)
- DC/DC converters
- Topologies
- A/D drivers
- Pulse transformer drivers
- Industrial Power Supplies
- Broadcast equipment
