UCD90120ARGCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~110°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Type | Sequencer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | UCD90120 |
| Output | Open Drain, Push-Pull |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 50mA |
| Adjustable Threshold | YES |
| Quiescent Current | 50mA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 12 |
| Reset Timeout | 2μs Minimum |
| Max Junction Temperature (Tj) | 125°C |
| Ambient Temperature Range High | 110°C |
| Height | 1mm |
| Length | 9mm |
| Width | 9mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCD90120ARGCT Overview
This voltage supervisor has a total of 64 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for 64-VFQFN Exposed Pad functions. As with other Sequencer products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 12. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 64. The pins of the power management system count 64. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 3V, which is the minimum supply voltage that should be applied. There should be no more than 3.6V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~110°C TA. During operation, this power management system outputs Open Drain, Push-Pull. A similar IC managements number of the manufacturer can always be found by using UCD90120, the base power ics number.
UCD90120ARGCT Features
Sequencer type
Minimum supply voltage of 3V
UCD90120ARGCT Applications
There are a lot of Texas Instruments UCD90120ARGCT Voltage Supervisors applications.
- Stable power system
- Important electronics for automotive protection
- Smart meter
- Multi-voltage system
- Dash board
- Smartphones
- Satellite navigation
- Digitally controlled LDO regulators circuit
- FPGA design
- Medical-specific insulation monitor
