UCD9080RHBTG4
| Parameters | |
|---|---|
| Supply Voltage | 3.3V |
| Frequency | 100kHz |
| Base Part Number | UCD9080 |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Number of Channels | 8 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Quiescent Current | 4.5mA |
| Watchdog Timer | No |
| Max Output Voltage | 3.6V |
| Reset | Active High/Active Low |
| Voltage - Threshold | Adjustable/Selectable |
| Number of Voltages Monitored | 8 |
| Reset Timeout | 2μs Minimum |
| Max Input Voltage | 3.6V |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Sequencer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
UCD9080RHBTG4 Overview
There are 32 terminals connected to this power management, which makes it easy to mount. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 8 channels. In this PMIC, you can find 32-VFQFN Exposed Pad functions for your reference. Compared to other Sequencer products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 3.3V supply voltages. During operation, the power ic is supplied with a voltage of 8. Power management has a total of 32 pins. The pins of the power management system count 32. Supply voltage (Vsup) should be at least 3V for this power management. There should be no more than 3.6V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. If you want to search for similar IC managements of this manufacturer, you can always refer to UCD9080, which is the base power ics number. The maximum supply temperature is 350μA. As a general rule, this IC management operates at a frequency of 100kHz, which is fine for most applications. The architecture of this IC power provides 4 outputs.
UCD9080RHBTG4 Features
Sequencer type
Minimum supply voltage of 3V
UCD9080RHBTG4 Applications
There are a lot of Texas Instruments UCD9080RHBTG4 Voltage Supervisors applications.
- Analog circuit
- Stable power system
- Unattended substation automation
- Microcontroller system
- Automotive permanent magnet synchronous motors
- Detection of phase imbalance
- Precision measurement
- DC stabilized power supply module
- Household appliances
- Telecommunications equipment
