UCD9222WRGZREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 139.989945mg |
| Operating Temperature | -55°C~115°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | UCD9222 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | PWM Signal |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, SMBus |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Operating Supply Current | 54mA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| Control Features | Enable, Power Good, Reset, Tracking |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 15.26kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 65mA |
| Synchronous Rectifier | No |
| Max Duty Cycle | 100 % |
| Serial Interfaces | I2C, PMBus, SMBus |
| Clock Sync | Yes |
| Height | 1mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCD9222WRGZREP Overview
Capsuled in the 48-VFQFN Exposed Pad package, the switching controller suits most application needs. dc motor controller is suitable for 2 output generation. An enclosure of Tape & Reel (TR) is used to package the PMIC. PWM Signal dc switching's outputs (s) can be handled by it. 3V~3.6V is the operating voltage and supply voltage of the dc control. Suitable for a -55°C~115°C TJ dc switcher. In this switching controller, the switch can be set to 15.26kHz~2MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. Enable, Power Good, Reset, Tracking is used for efficient switching control in the dcdc regulator. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. A switching converters's terminal (s) sits at the QUAD position. A variety of dc switching's functions can be performed on 48 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. You can find other relevant dc to dc converter ics by searching "UCD9222". The switching converter has a total of 48 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. Switching controllers work at 2MHz Hz. To operate the voltage regulator dc to dc safely and reliably, users should apply 3.3V. Switching controller is necessary to provide a voltage of 3.3V. 65mA more than 65mA current should be supplied to the controller. 54mA volts is the supply current.
UCD9222WRGZREP Features
PWM Signal Outputs
Switching Frequency: 15.26kHz~2MHz
Enable, Power Good, Reset, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 2MHz
UCD9222WRGZREP Applications
There are a lot of Texas Instruments UCD9222WRGZREP DC to DC converter applications.
- Shearing machines
- Hydro power
- Direct power supply system
- Radio equipment
- Die casting equipment
- Mobile phones
- Cutting machine tools
- Window air conditioners
- Industrial controllers
- Adjustable voltage or current linear circuits
