UCD9224RGZT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Weight | 139.989945mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | UCD9224 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 3V |
| Output Type | PWM Signal |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 8mA |
| Output Configuration | Positive |
| Output Current | 6mA |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| Max Supply Current | 65mA |
| Control Features | Enable, Power Good, Reset, Sequencing, Tracking |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 15.26kHz~2MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 3.6V |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Serial Interfaces | I2C, PMBus, SMBus |
| Clock Sync | Yes |
| Height | 1mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCD9224RGZT Overview
The switching controller fits in the 48-VFQFN Exposed Pad package and is ideal for most applications. 2 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With this function, you can deal with PWM Signal dc switching's outputs (s). 3V~3.6V is the operating voltage and supply voltage of the dc control. Work well in dc switchers with a -40°C~125°C TJ. There is a switch at 15.26kHz~2MHz that can be used with this controller. dc dc regulators can be carried out with Surface Mount. Enable, Power Good, Reset, Sequencing, Tracking is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at QUAD . The 48 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 3.3V. Search for "UCD9224" to find other relevant dc to dc converter ics. There are 48 pins on switching converter. Based on the test statistics, DC regulator outputs voltage 3V. If you are starting a new project, you should note the dc dc regulator's typical output current is 6mA. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controller operates at 2MHz Hz. A nominal working status is achieved when the input voltage is set to 3.6V. The supply current is 8mA. There is a possibility of damage to the component if the switching voltage regulators current exceeds 65mA.
UCD9224RGZT Features
PWM Signal Outputs
Switching Frequency: 15.26kHz~2MHz
Enable, Power Good, Reset, Sequencing, Tracking
PULSE WIDTH MODULATION
Frequency: 2MHz
UCD9224RGZT Applications
There are a lot of Texas Instruments UCD9224RGZT DC to DC converter applications.
- Die casting equipment
- Gear/thread machining machines
- Digital video recorders
- SMT equipment
- Medical equipment
- Elevator lighting
- Linear guide
- Access control systems
- Overvoltage protection circuits in TV sets
- Drilling machines
