Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-VFQFN Exposed Pad |
Number of Pins |
20 |
Weight |
123.008581mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tray |
Published |
2014 |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
Resistance |
55mOhm |
Terminal Finish |
Matte Tin (Sn) - annealed |
Applications |
USB Dedicated Charging Port (DCP), Power Switch |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
UCS1003 |
Number of Outputs |
2 |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
4.5V |
Analog IC - Other Type |
ANALOG CIRCUIT |
Operating Supply Current |
650μA |
Number of Ports |
1 |
Output Current |
3A |
Turn On Delay Time |
400 μs |
Turn-Off Delay Time |
400 μs |
USB |
USB 2.0 |
Height |
850μm |
Length |
4mm |
Width |
4mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
UCS1003-1-BP Overview
Tray is acceptable for shipping the power management.In order to facilitate transportation, it is packaged the power management in 20-VFQFN Exposed Pad .The Surface Mount mounting method is universal for easy adaptation.At USB Dedicated Charging Port (DCP), Power Switch and other applications, this power management is targeted.The operating temperature of the power management ic should be set to -40°C~125°C to avoid mal-function.The power management operates at 4.5V~5.5V volts.You can search UCS1003 if you are looking for more power ic's pin-to-pin solutions.The power management is equipped with 20 terminals.The IC has been praised a lot for its capability of being a ANALOG CIRCUIT analog instruments designs.The integrated power supplies is designed with 20 pins.A Surface Mount allows mounting on a PCB or other board.Powered by a 5V voltage, the power manager is capable of handling a range of demanding functions.An input voltage of 650μA is required for this power management ic to operate.A minimum of 4.5V is needed for it to start.If the voltage is greater than 5.5V , you are not supposed to power the power supply ic.The ic power supply supports a total of 2 outputs.The ic power supply should be displaying 3A as its current output.
UCS1003-1-BP Features
Mainly used in USB Dedicated Charging Port (DCP), Power Switch applications
Operating temperature: -40°C~125°C
ANALOG CIRCUIT analog IC
2 Outputs
UCS1003-1-BP Applications
There are a lot of Microchip Technology UCS1003-1-BPPower Management applications.
- Equipment Run-Off of Battery Backup
- Base Station Power Distribution Systems
- Networking Equipment
- Electronic Test Equipment
- LP2996A: DDR3
- Medical
- System Thermal for PCs
- Supplement In-Circuit Tester (ICT) Access
- Peripheral I/O Power
- Radar