UDK2559B
| Parameters | |
|---|---|
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDK2559 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 80mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-COLLECTOR |
| Output Current per Channel | 700mA |
| Output Polarity | INVERTED |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 5.33mm |
| Length | 19.05mm |
| Width | 6.35mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-PowerDIP (0.300, 7.62mm) |
UDK2559B Overview
It is packaged in the manner of a Tube.Package 16-PowerDIP (0.300, 7.62mm) contains it.This lighting drivere has a mounting type of Through Hole.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~125°C TA to ensure reliable operation.The LED driver has 4 outputs.Operation is based on a supply voltage of 4.75V~5.25V.There is a maximum output voltage of Bipolar volts on this LED driver.The UDK2559 family consists of this type.There are 16 terminations in it.The 16 pins are used to operate the LED driver.Currently, there are 4 functions associated with the lighting driver.To comply with the operation criteria, the maximum output current is reduced to 1A.It is possible to obtain high efficiency with a supply voltage of 5V.It is positioned in the direction of Through Hole.This LED driver is equipped with a total of 16 pins.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part's power supply is 5V.The supply voltage should be set at 5V for best efficiency.
UDK2559B Features
Supplied from 5V
UDK2559B Applications
There are a lot of Allegro MicroSystems UDK2559B Power Switches ICs applications.
- PC Card Hot Swap
- Portable/Handheld Devices
- Portable GPS
- Smartphone and PDA
- Portable Devices
- Wireless Modem Data Cards
- Wireless Headsets
- Solid State Drivers
- Solid-State Drives
- USB3.1 Power Delivery
