UDK2559B-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-PowerDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | UDK2559 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 700mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 5.33mm |
| Length | 19.05mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
UDK2559B-T Overview
The LED driver's packaged as a Tube.It is included in the package 16-PowerDIP (0.300, 7.62mm).In this case, the LED driving board is mounted as Through Hole.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TA.The LED driver has a total of 4 outputs.The LED driving board is powered by a voltage of 4.75V~5.25V.A maximum voltage of Bipolar volts is available from the output of this LED driver.The UDK2559 family consists of this type.A total of 16 terminations have been found in it.In order to operate, 16 pins are used.It contains 1 functions.The maximum output current must drop to 1A to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.This lighting driver is mounted in the way of Through Hole.16 pins are equipped with it.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.It has a power supply of 5V.For maximum efficiency, the supply voltage should be set to 5.25V.
UDK2559B-T Features
Supplied from 5V
UDK2559B-T Applications
There are a lot of Allegro MicroSystems UDK2559B-T Power Switches ICs applications.
- Notebook PC
- Notebook and Tablet Computers
- Hot Swap
- PC Card Hot Swap
- Hard Disk Drives
- Various applications equipped with buttons
- Mobile Communication Devices
- Portable Music Players
- Wireless Modem Data Cards
- Portable Devices
