UDK2559EBTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDK2559 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 80mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-COLLECTOR |
| Output Current per Channel | 700mA |
| Output Polarity | INVERTED |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 11.51mm |
| Width | 11.51mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDK2559EBTR Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 28-LCC (J-Lead) package.It has been mounted as Surface Mount on the LED driver.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~125°C TA in order to ensure reliable operation.There is a default setting of 4 for output.A voltage of 4.75V~5.25V is used to power it.A maximum output voltage of Bipolar volts has been specified.It belongs to the family UDK2559.As a result, there are 28 terminations.The operation is carried out using the 28 pins.As far as the lighting driver is concerned, there are 4 functions.In order to meet the operation criteria, the maximum output current drops to 1A.A supply voltage of 5V leads to high efficiency.In this case, it is mounted in the way of Surface Mount.This LED driver is equipped with a total of 28 pins.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The power supply of the part is 5V.In order to optimize the efficiency of the supply voltage, it should be set to 5V.
UDK2559EBTR Features
Supplied from 5V
UDK2559EBTR Applications
There are a lot of Allegro MicroSystems UDK2559EBTR Power Switches ICs applications.
- Set-Top Boxes
- Storage Drives
- Gaming
- Handheld Devices
- Wireless Headsets
- PC Card Hot Swap
- Wireless Modem Data Cards
- Mobile Communication Devices
- Smart Phones, Feature Phones
- Telecom and Network Systems
