UDK2559LB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerSOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDK2559 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 80mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-COLLECTOR |
| Output Current per Channel | 700mA |
| Output Polarity | INVERTED |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDK2559LB Overview
As a result, it is packaged in the form of a Tube.It is included in the package 16-PowerSOIC (0.295, 7.50mm Width).In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.Keeping the temperature at -40°C~125°C TA ensures reliable operation.By default, it is set to output 4.With a supply voltage of 4.75V~5.25V, the LED driving board operates.The maximum output voltage is Bipolar volts.It comes under the family of UDK2559.A total of 16 terminations have been recorded.During operation, the 16 pins are used.There are 4 functions of the LED driver.Maximum output current falls to 1A when operation criteria are met.As long as the supply voltage is 5V, high efficiency can be achieved.Surface Mount is mounted in the way.The LED driving board is equipped with a total of 16 pins.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.The power supply of the part is 5V.In order to maximize efficiency, the supply voltage should be set to 5V.
UDK2559LB Features
Supplied from 5V
UDK2559LB Applications
There are a lot of Allegro MicroSystems UDK2559LB Power Switches ICs applications.
- USB3.1 Power Delivery
- Smartphone and PDA
- USB Power Distribution
- Notebook and Tablet Computers
- PC Card Hot Swap
- Set-top-box
- Wireless/Networking Cards
- Telecom and Network Systems
- Hot Swaps
- Portable/Handheld Devices
