UDK2559LBTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerSOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDK2559 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 80mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-COLLECTOR |
| Output Current per Channel | 700mA |
| Output Polarity | INVERTED |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDK2559LBTR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 16-PowerSOIC (0.295, 7.50mm Width) package contains it.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~125°C TA.There are 4 outputs available on this lighting driver.The LED driving board operates with a supply voltage of 4.75V~5.25V.There is a maximum output voltage of Bipolar volts.It comes under the family of UDK2559.There are 16 terminations in it.The operation is performed through the 16 pins.Currently, there are 4 functions associated with the lighting driver.In order to meet the operation criteria, the maximum output current drops to 1A.It is possible to obtain high efficiency with a supply voltage of 5V.The LED driving board is mounted in the way of Surface Mount.The LED driver has a total of 16 pins.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.This part has a power supply of 5V.A supply voltage of 5V is recommended for maximum efficiency.
UDK2559LBTR Features
Supplied from 5V
UDK2559LBTR Applications
There are a lot of Allegro MicroSystems UDK2559LBTR Power Switches ICs applications.
- Various applications equipped with buttons
- Gaming
- Hot-Swap Systems
- Notebook PC
- Portable Video Game Players
- Hot Swap
- PC Cards
- USB Power Distribution
- Mobile Communication Devices
- Portable/Handheld Devices
