UDK2559LBTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerSOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Base Part Number | UDK2559 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 80mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 700mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
UDK2559LBTR-T Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a 16-PowerSOIC (0.295, 7.50mm Width) package that includes it.The lighting driver is mounted in the Surface Mount position.This switch is of type General Purpose.The temperature should be set to -40°C~125°C TA to ensure reliable functioning.The lighting driver is equipped with 4 outputs that can be used.In order to operate, it requires a voltage supply of 4.75V~5.25V.Voltage output is Bipolar volts at maximum.The UDK2559 family consists of this type.It contains 16 terminations.During operation, the 16 pins are used.There are 1 functions of the LED driver.The maximum output current must drop to 1A to meet the operation criteria.High efficiency is possible at 5V supply voltage.Surface Mount is mounted in the way of this LED driving board.The LED driver has a total of 16 pins.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.This part has a power supply of 5V volts.The supply voltage should be set at 5V for best efficiency.
UDK2559LBTR-T Features
Supplied from 5V
UDK2559LBTR-T Applications
There are a lot of Allegro MicroSystems UDK2559LBTR-T Power Switches ICs applications.
- Hot Swap
- USB Ports/Hubs
- Telecom and Network Systems
- Hot Swaps
- Wireless Modem Data Cards
- Notebook and Tablet Computers
- Mobile Communication Devices
- Hard Disk Drives
- Handheld Devices
- HDD, SSD
