Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-PowerDIP (0.300, 7.62mm) |
Number of Pins |
16 |
Operating Temperature |
-20°C~85°C TA |
Packaging |
Tube |
Published |
2002 |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
TIN LEAD |
Subcategory |
Peripheral Drivers |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
UDN2559 |
Pin Count |
16 |
Number of Outputs |
4 |
Output Type |
Bipolar |
Max Output Current |
1A |
Supply Voltage-Max (Vsup) |
5.25V |
Power Supplies |
5V |
Interface |
On/Off |
Nominal Supply Current |
80mA |
Output Configuration |
Low Side |
Output Current |
700mA |
Voltage - Supply (Vcc/Vdd) |
4.75V~5.25V |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Output Characteristics |
OPEN-COLLECTOR |
Output Current per Channel |
700mA |
Output Polarity |
INVERTED |
Ratio - Input:Output |
1:1 |
Input Characteristics |
STANDARD |
Voltage - Load |
60V Max |
Driver Number of Bits |
4 |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Turn On Time |
20 μs |
Output Peak Current Limit-Nom |
1A |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL |
Height Seated (Max) |
5.33mm |
Length |
19.18mm |
Width |
7.62mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
UDN2559B Overview
As you can see, it's packaged in the way of a Tube.It's included in the 16-PowerDIP (0.300, 7.62mm) package.The LED driver is mounted as Through Hole.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -20°C~85°C TA for reliable operation.The LED driver has 4 outputs.A supply voltage of 4.75V~5.25V is required for it to operate.It produces a maximum output voltage of Bipolar volts at its maximum output.This object belongs to the UDN2559 family.It has a total of 16 terminations.During operation, the 16 pins are used.As far as the lighting driver is concerned, there are 4 functions.In order to meet the operation criteria, the maximum output current drops to 1A.It is possible to achieve a high level of efficiency with a supply voltage of 5V.It is positioned in the direction of Through Hole.This LED driver is equipped with a total of 16 pins.This case results in a 700mA output current.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.Vsup (maximum supply voltage) is set to 5.25V.A 5V power supply is used by the part.
UDN2559B Features
Supplied from 5V
UDN2559B Applications
There are a lot of Allegro MicroSystems UDN2559B Power Switches ICs applications.
- Hot Swap
- USB3.1 Power Delivery
- Handheld Devices
- Low Voltage I/O System Power
- Solid State Drivers
- Portable/Handheld Devices
- Gaming
- Notebook and Tablet Computers
- Portable Devices
- Smart Phones, Feature Phones