UDN2559EB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDN2559 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 80mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-COLLECTOR |
| Output Current per Channel | 700mA |
| Output Polarity | INVERTED |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 11.505mm |
| Width | 11.505mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDN2559EB Overview
It's?packaged?in?the way?of?a?Tube.Package 28-LCC (J-Lead) contains it.The LED driver is mounted as Surface Mount.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -20°C~85°C TA.There is a default setting of 4 for output.To operate, it needs a supply voltage of 4.75V~5.25V.It has a maximum output voltage of Bipolar volts.The UDN2559 family consists of this type.A total of 28 terminations have been found in it.In order to operate, 28 pins are used.There are 4 functions of the LED driver.The maximum output current must drop to 1A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.It is equipped with a total of 28 pins.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In this case, the power supply is 5V.In order to optimize the efficiency of the supply voltage, it should be set to 5V.
UDN2559EB Features
Supplied from 5V
UDN2559EB Applications
There are a lot of Allegro MicroSystems UDN2559EB Power Switches ICs applications.
- Wireless/Networking Cards
- USB Protection
- Gaming
- HDD, SSD
- Smartphone and PDA
- Set-top-box
- Portable Music Players
- USB3.1 Power Delivery
- HDD and SSD
- Hot-Swap Systems
