UDN2559EBTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Base Part Number | UDN2559 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Voltage | 60V |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 80mA |
| Output Configuration | Low Side |
| Output Current | 700mA |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 700mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Length | 11.51mm |
| Width | 11.51mm |
| RoHS Status | ROHS3 Compliant |
UDN2559EBTR-T Overview
It is packaged in the manner of a Tape & Reel (TR).Package 28-LCC (J-Lead) contains it.It has been mounted as Surface Mount on the LED driver.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -20°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.Operation is based on 4.75V~5.25V supply voltage.There is a maximum output voltage of Bipolar volts on this LED driver.The UDN2559 family consists of this type.A total of 28 terminations can be found in it.28 pins are used for operation.Currently, the lighting driver has a total of 1 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.The supply voltage can be 5V for high efficiency.Surface Mount is mounted in the way.This LED driver is equipped with a total of 28 pins.In this case, the output current is set to 700mA.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This part's power supply is 5V.It is recommended that the supply voltage be set at 5V in order to achieve maximum efficiency.
UDN2559EBTR-T Features
Supplied from 5V
UDN2559EBTR-T Applications
There are a lot of Allegro MicroSystems UDN2559EBTR-T Power Switches ICs applications.
- PDAs
- Various applications equipped with buttons
- Wireless Modem Data Cards
- Notebook PC
- Telecom and Network Systems
- Hot Swap
- Portable Music Players
- USB Power Distribution
- Smartphone and PDA
- USB Ports/Hubs
