UDN2916B
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-PowerDIP (0.300, 7.62mm) |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDN2916 |
| JESD-30 Code | R-PDIP-T24 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 5.33mm |
| Length | 31.875mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDN2916B Overview
Drivers controllers is designed with Tube package.Drivers controllers comes in a 24-PowerDIP (0.300, 7.62mm) case.The part should be mounted by Through Hole.As a result, it is appropriate for the component connected to General Purpose.The device can supply 4.75V~5.25V volts.This device operates at a temperature of -20°C~150°C TJ.There is a motor type Brushed DCassociated with this motor type.A total of 24terminations are available in this part.Drivers controllers is possible to apply voltage at a rate of 10V~45Vto the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.Its recommended mounting way is Through Hole.Maintain a current of 750mAfor the part output.This device utilizes the STEPPER MOTOR CONTROLLERanalog integrated circuit.According to the UDN2916part number, the part is found.The Motion Control Electronicsseries contains it.Drivers controllers also has a characteristic of [0].
UDN2916B Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on UDN2916 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
UDN2916B Applications
There are a lot of Allegro MicroSystems UDN2916B motor drivers applications.
- Handheld devices
- Horticultural applications
- Human-centric lighting
- Scanning equipment
- Street lights
- Large format LED backlighting
- Digital still cameras
- Smart lighting applications
- PDAs
- LED ballasts
