UDN2916B-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-PowerDIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UDN2916 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Voltage | 45V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 5.33mm |
| Length | 30.1mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UDN2916B-T Overview
The design contains a Tubepackage.The part is packged with 24-PowerDIP (0.300, 7.62mm) case.Ideally, the part should be mounted by Through Hole.Fits the component connected to General Purpose.A device with a voltage range of 4.75V~5.25V volts is available.A range of -20°C~150°C TJis available for operating temperature.Drivers controllers is possible to classify the motor type as Brushed DC.This part has 24termination options.A voltage of 10V~45Vcan be applied to the load.Drivers controllers is important to remember that this amplifier should be run at 5V.Its recommended mounting way is Through Hole.Maintain a current of 750mAfor the part output.A STEPPER MOTOR CONTROLLERanalog IC is employed in this device.This can be determined by looking at the UDN2916 part number.24pins are available on the device.The Motion Control Electronicsseries contains it.4outputs are available in total.Drivers controllers is maintained at 45V volts.
UDN2916B-T Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on UDN2916 number
designed with 4 outputs
UDN2916B-T Applications
There are a lot of Allegro MicroSystems UDN2916B-T motor drivers applications.
- A cross between entertainment
- Emergency lighting
- Automotive exterior and interior lighting
- RGB and monochromatic LED drivers for signage and traffic signals
- Charge pump circuits
- Side marker lights
- Horticultural applications
- Indicator circuit
- LED ballasts
- Commercial office
