UDN2916EBTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | UDN2916 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UDN2916EBTR-T Overview
The package is designed with [0].Drivers controllers comes in a 44-LCC (J-Lead) case.Ideally, the part should be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.4.75V~5.25V volts can be supplied by the device.This device operates at a temperature range of -20°C~150°C TJ.There is a motor type Brushed DCavailable.A total of 44terminations are available in this part.At a rate of [0], voltage can be applied to the load.Drivers controllers is important to remember that this amplifier should be run at 5V.Surface Mountis its recommended mounting method.Maintain a 750mAoutput current for the part.A STEPPER MOTOR CONTROLLERanalog integrated circuit is employed in the device.Using the UDN2916part number, it is located.44pins are used in its design.This is part of the Motion Control Electronics series.There is also a characteristic ALSO REQUIRES 10V TO 45V VBB SUPPLYassociated with it.
UDN2916EBTR-T Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on UDN2916 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
UDN2916EBTR-T Applications
There are a lot of Allegro MicroSystems UDN2916EBTR-T motor drivers applications.
- Industrial lighting
- Dash
- Camera-enabled smartphones
- drivers for outdoor application
- Matrix LED dimmers
- PWM generators
- Hidden coves in high-end residential settings
- Automotive exterior and interior lighting
- Hazardous application
- Step-up or step-down driver topologies
