UDN2916LB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDN2916 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDN2916LB Overview
This package is designed to work with [0].This part is packed in a 24-SOIC (0.295, 7.50mm Width) case.Ideally, the part should be mounted by Surface Mount.The component connected in General Purposematches it perfectly.This device is capable of supplying voltages up to 4.75V~5.25V volts.This device operates at a temperature range of -20°C~150°C TJ.There is a motor type Brushed DCassociated with this motor type.This part offers 24terminations.You can apply voltage at 10V~45Vto the load.You should run this amplifier at 5V.Ideally, it should be mounted in the Surface Mountposition.Keep the part output current at 750mA.The device utilizes the IC STEPPER MOTOR CONTROLLERwhich is an analog IC.As a result of the UDN2916part number, it can be found.Drivers controllers is part of the series [0].Additionally, it possesses a characteristic of [0].
UDN2916LB Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on UDN2916 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
UDN2916LB Applications
There are a lot of Allegro MicroSystems UDN2916LB motor drivers applications.
- Hidden coves in high-end residential settings
- Fog lamps
- Turn signals
- Home lighting systems
- Architectural lighting
- Display LED backlighting
- Horticultural lighting
- Dome
- Matrix LED dimmers
- Arena lighting
