UDN2916LB-T
| Parameters | |
|---|---|
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | UDN2916 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Voltage | 45V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
UDN2916LB-T Overview
This package is designed to work with [0].Drivers controllers is packaged wDrivers controllersh a 24-SOIC (0.295, 7.50mm Width) case.Surface Mountshould be used for mounting the part.This component is suitable for the component connected to General Purpose.This device is capable of supplying voltages up to 4.75V~5.25V volts.The operating temperature ranges from -20°C~150°C TJto -20°C~150°C TJ.A motor of this type can be categorized as Brushed DC.A total of 24terminations are available in this part.At a rate of [0], voltage can be applied to the load.Please take in mind that this amplifier should be run at 5V.Ideally, it should be mounted in the Surface Mountposition.Maintain a 750mAoutput current for the part.A STEPPER MOTOR CONTROLLERanalog integrated circuit is employed in the device.Drivers controllers is based on the UDN2916 part number.24pins are present on the device.In the Motion Control Electronicsseries, it is included.There are a total of 4outputs available.A constant voltage is maintained at 45V.
UDN2916LB-T Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on UDN2916 number
designed with 4 outputs
UDN2916LB-T Applications
There are a lot of Allegro MicroSystems UDN2916LB-T motor drivers applications.
- Matrix LED dimmers
- Industrial high-bay lights
- parking lights
- Camcorders
- Scanning equipment
- Emergency lighting
- Camera-enabled smartphones
- LED bias
- Dome
- Monitoring the energy that the luminaire uses
