UDN2916LBTR-T
| Parameters | |
|---|---|
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UDN2916 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 45V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
UDN2916LBTR-T Overview
The design includes a package of type [0].This part is packed in a 24-SOIC (0.295, 7.50mm Width) case.The part should be mounted by Surface Mount.I believe it is suitable for the component connected to General Purpose.There is a capability for the device to provide 4.75V~5.25V volts.Drivers controllers operates wDrivers controllershin a range of -20°C~150°C TJdegrees Celsius.There is a motor type Brushed DCassociated with this motor type.A total of 24terminations are available in the part.Drivers controllers is possible to apply voltage to the load at the rate of 10V~45V.The amplifier should be set to 5V.The recommended way to mount it is Surface Mount.Maintain a current of 750mAfor the part output.A STEPPER MOTOR CONTROLLERanalog integrated circuit is employed in this device.UDN2916is the part number that finds it.24 pins are provided for its design.In the Motion Control Electronicsseries, it is included.There are a total of 2outputs available.In this case, the output voltage is kept at 45V volts.The characteristic of ALSO REQUIRES 10V TO 45V VBB SUPPLYis also present.
UDN2916LBTR-T Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on UDN2916 number
designed with 2 outputs
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
UDN2916LBTR-T Applications
There are a lot of Allegro MicroSystems UDN2916LBTR-T motor drivers applications.
- Footwell lighting
- High brightness LED lighting
- Camcorders
- Dome
- Arena lighting
- Monitoring the energy that the luminaire uses
- Digital still cameras
- RGB and monochromatic LED drivers for signage and traffic signals
- Scanning equipment
- Indicator circuit
