UDN2982A-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UDN2982 |
| Pin Count | 18 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Number of Elements | 8 |
| Polarity | NPN, PNP |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Max Output Voltage | 50V |
| Switch Type | General Purpose |
| Collector Emitter Voltage (VCEO) | 50V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~50V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed) |
| Collector Emitter Saturation Voltage | 1.8V |
| Turn On Time | 2 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UDN2982A-T Overview
It is packaged in the manner of a Tube.It's included in the 18-DIP (0.300, 7.62mm) package.It has been mounted as Through Hole on the LED driver.General Purpose is the switch type it owns.In order to guarantee reliable performance, the temperature should be set to -20°C~85°C TA.A voltage of Not Required is used to power it.It produces a maximum output voltage of Bipolar volts at its maximum output.The UDN2982 family contains this object.A total of 18 terminations have been found in it.It is necessary to use the 18 pins in order to operate the LED driver.It contains 8 functions.The maximum output current is reduced to 500mA to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.Through Hole is mounted in the way.A total of 18 pins are included in this LED driver.In this case, the output current will be set to 500mA.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.A total of 8 elements are present.
UDN2982A-T Features
Supplied from 5V
UDN2982A-T Applications
There are a lot of Allegro MicroSystems UDN2982A-T Power Switches ICs applications.
- Smart Phones, Feature Phones
- Telecom and Network Systems
- HDD, SSD
- PC Cards
- Notebook PC
- PC Card Hot Swap
- Handheld Devices
- Wireless Headsets
- Hot Swaps
- Hot Swap
