UDN2982LW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 8 |
| Supply Voltage | 35V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDN2982 |
| Pin Count | 18 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Polarity | NPN, PNP |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-EMITTER |
| Collector Emitter Voltage (VCEO) | 50V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 5V~50V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed) |
| Collector Emitter Saturation Voltage | 1.8V |
| Turn On Time | 2 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDN2982LW Overview
The LED driver's packaged as a Tube.This package is included in 20-SOIC (0.295, 7.50mm Width).This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.Keeping the temperature at -20°C~85°C TA ensures reliable operation.The LED driver is equipped with 8 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of Bipolar volts can be obtained with this LED driver.It is part of the UDN2982 family of LED drivers.A total of 18 terminations have been found in it.It is necessary to use the 18 pins in order to operate the LED driver.Currently, there are 8 functions associated with the lighting driver.To comply with the operation criteria, the maximum output current is reduced to 500mA.The supply voltage of 35V is conducive to high efficiency.Surface Mount is mounted in the way of this LED driving board.18 pins are equipped with it.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.For normal operation, the supply voltage (Vsup) must be kept above 5V.
UDN2982LW Features
Supplied from 35V
UDN2982LW Applications
There are a lot of Allegro MicroSystems UDN2982LW Power Switches ICs applications.
- USB3.1 Power Delivery
- USB Power Distribution
- USB Protection
- Portable Music Players
- Notebook PC
- Portable GPS
- Wireless/Networking Cards
- Solid State Drivers
- Portable/Handheld Devices
- Handheld Devices
