UDN2982LW-T
| Parameters | |
|---|---|
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 35V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | UDN2982 |
| Pin Count | 18 |
| Number of Outputs | 8 |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Polarity | NPN, PNP |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Collector Emitter Voltage (VCEO) | 50V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~50V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed) |
| Collector Emitter Saturation Voltage | 1.8V |
| Turn On Time | 2 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
UDN2982LW-T Overview
It is packaged in the manner of a Tube.It is included with the 20-SOIC (0.295, 7.50mm Width) package as well.In this case, the LED driving board is mounted as Surface Mount.It owns General Purpose switch type.It is best to set the temperature to -20°C~85°C TA to ensure reliable operation.The LED driver has a total of 8 outputs.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of Bipolar volts on this LED driver.It is part of the UDN2982 family of LED drivers.It contains 18 terminations.It is necessary to use the 18 pins in order to operate the LED driver.As far as functions are concerned, the lighting driver has 8.In order to meet the operation criteria, the maximum output current drops to 500mA.The supply voltage can be 35V for high efficiency.This lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 18 pins.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.Normal operation requires Vsup above 5V.
UDN2982LW-T Features
Supplied from 35V
UDN2982LW-T Applications
There are a lot of Allegro MicroSystems UDN2982LW-T Power Switches ICs applications.
- USB Ports/Hubs
- Various applications equipped with buttons
- Hot Swaps
- USB3.1 Power Delivery
- USB Protection
- HDD and SSD
- Portable/Handheld Devices
- Portable Music Players
- Portable GPS
- Solid-State Drives
