UDN2982LWTR-T
| Parameters | |
|---|---|
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed) |
| Turn On Time | 2 μs |
| Output Peak Current Limit-Nom | 0.5A |
| Turn Off Time | 10 μs |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 8 |
| Supply Voltage | 35V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Base Part Number | UDN2982 |
| Pin Count | 18 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 50V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~50V |
UDN2982LWTR-T Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 20-SOIC (0.295, 7.50mm Width).Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -20°C~85°C TA.The lighting driver has a total of 8 outputs that are available for use.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of Bipolar volts can be obtained with this LED driver.It is part of the UDN2982 family of LED drivers.As a result, there are 18 terminations.In order to operate, the 20 pins are used.Currently, there are 8 functions associated with the lighting driver.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 35V.As a result, it is mounted in the manner of Surface Mount.The LED driver has a total of 18 pins.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The lighting driver is configured to have a maximum supply voltage of 50V (Vsup).The supply voltage (Vsup) should be kept above 5V for normal operation.
UDN2982LWTR-T Features
Supplied from 35V
UDN2982LWTR-T Applications
There are a lot of Allegro MicroSystems UDN2982LWTR-T Power Switches ICs applications.
- Portable GPS
- Gaming
- Telecom and Network Systems
- Portable/Handheld Devices
- Portable Music Players
- Portable GPS Device
- USB Power Distribution
- USB3.1 Power Delivery
- Hard Disk Drives
- HDD, SSD
