banner_page

UDN2987A-6-T

Bipolar 2.54mm PMIC UDN2987 20 Pin 30V 20-DIP (0.300, 7.62mm)


  • Manufacturer: Allegro MicroSystems
  • Nocochips NO: 26-UDN2987A-6-T
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 136
  • Description: Bipolar 2.54mm PMIC UDN2987 20 Pin 30V 20-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Manufacturer Package Identifier UDN2987A-6-T
Operating Temperature -20°C~85°C TA
Packaging Tube
Published 2002
JESD-609 Code e3
Feature Status Flag
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Peripheral Drivers
Terminal Position DUAL
Number of Functions 1
Supply Voltage 30V
Terminal Pitch 2.54mm
Base Part Number UDN2987
Pin Count 20
Number of Outputs 8
Output Voltage 35V
Output Type Bipolar
Max Output Current 500mA
Supply Voltage-Min (Vsup) 4.75V
Interface On/Off
Nominal Supply Current 18mA
Output Configuration High Side
Output Current 350mA
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Output Current per Channel 350mA
Ratio - Input:Output 1:1
Voltage - Load 4.75V~35V
Driver Number of Bits 8
Fault Protection Current Limiting (Fixed), Over Temperature
Turn On Time 1 μs
Output Peak Current Limit-Nom 0.35A
Max Junction Temperature (Tj) 150°C
Turn Off Time 1 μs
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL
Ambient Temperature Range High 85°C
Height 5.33mm
Length 26.16mm
Width 7.62mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

UDN2987A-6-T Overview


Tube is the way it's packaged.Package 20-DIP (0.300, 7.62mm) contains it.A Through Hole mounting is used for the LED driving board.There is a switch type of General Purpose.It is recommended to set the temperature to -20°C~85°C TA in order to ensure reliable operation.As a default, the output is set to 8.With a supply voltage of Not Required, the LED driving board operates.Voltage output is Bipolar volts at maximum.Currently, the LED driving board is equipped with Status Flag features.The UDN2987 family consists of this type.It contains 20 terminations.The 20 pins are used to operate the LED driver.It consists of 1 functions.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 30V.It is positioned in the direction of Through Hole.A total of 20 pins are included in this LED driver.When this is the case, the output current is set to 350mA.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.Normal operation requires Vsup above 4.75V.

UDN2987A-6-T Features


Supplied from 30V

UDN2987A-6-T Applications


There are a lot of Allegro MicroSystems UDN2987A-6-T Power Switches ICs applications.

  • Storage Drives
  • Telecom and Network Systems
  • Hot Swap
  • Hard Disk Drives
  • HDD, SSD
  • Portable GPS
  • PC Card Hot Swap
  • Set-Top Boxes
  • Notebook PC
  • Various applications equipped with buttons

Write a review

Note: HTML is not translated!
    Bad           Good