UDN2987LW-6-T
| Parameters | |
|---|---|
| Output Voltage | 35V |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | On/Off |
| Nominal Supply Current | 18mA |
| Output Configuration | High Side |
| Output Current | 350mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 350mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.75V~35V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 0.6 μs |
| Output Peak Current Limit-Nom | 0.35A |
| Turn Off Time | 1 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 30V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UDN2987 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
UDN2987LW-6-T Overview
It is packaged in the manner of a Tube.This package is included in 20-SOIC (0.295, 7.50mm Width).The lighting driver has the mounting type Surface Mount.General Purpose is the type of switch owned by it.It is best to set the temperature to -20°C~85°C TA to ensure reliable operation.It is possible to use 8 outputs in the lighting driver.Operation is based on Not Required supply voltage.Voltage output is Bipolar volts at maximum.A lighting driver with Status Flag features is available.It belongs to the family UDN2987.As a result, there are 20 terminations.It is necessary to use the 20 pins in order to operate the LED driver.It has 1 functions.The maximum output current must drop to 500mA to meet the operation criteria.As long as the supply voltage is 30V, high efficiency can be achieved.Surface Mount is mounted in the way.A total of 20 pins are included in this LED driver.In this case, the output current is set to 350mA.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The supply voltage (Vsup) should be kept above 4.75V for normal operation.
UDN2987LW-6-T Features
Supplied from 30V
UDN2987LW-6-T Applications
There are a lot of Allegro MicroSystems UDN2987LW-6-T Power Switches ICs applications.
- Portable Video Game Players
- USB Protection
- Storage Drives
- Gaming
- Wireless Modem Data Cards
- Wearable Devices
- Portable Devices
- Telecom and Network Systems
- Set-Top Boxes
- USB Ports/Hubs
