Parameters | |
---|---|
Factory Lead Time | 1 Week |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 20-SOIC (0.295, 7.50mm Width) |
Number of Pins | 20 |
Operating Temperature | -20°C~85°C TA |
Packaging | Tape & Reel (TR) |
Published | 2005 |
JESD-609 Code | e3 |
Feature | Status Flag |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 20 |
ECCN Code | EAR99 |
Terminal Finish | Matte Tin (Sn) |
Subcategory | Peripheral Drivers |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 8 |
Supply Voltage | 30V |
Time@Peak Reflow Temperature-Max (s) | 40 |
Base Part Number | UDN2987 |
Pin Count | 20 |
Number of Outputs | 8 |
Output Voltage | 1.8V |
Output Type | Bipolar |
Max Output Current | 350mA |
Supply Voltage-Max (Vsup) | 35V |
Power Supplies | 4.75/35V |
Supply Voltage-Min (Vsup) | 4.75V |
Number of Channels | 1 |
Interface | On/Off |
Nominal Supply Current | 18mA |
Output Configuration | High Side |
Output Current | 350mA |
Voltage - Supply (Vcc/Vdd) | Not Required |
Propagation Delay | 300 ns |
Input Type | Non-Inverting |
Switch Type | General Purpose |
Output Characteristics | OPEN-EMITTER |
Ratio - Input:Output | 1:1 |
Voltage - Load | 4.75V~35V |
Driver Number of Bits | 8 |
Fault Protection | Current Limiting (Fixed), Over Temperature |
Turn On Time | 0.6 μs |
Output Peak Current Limit-Nom | 0.35A |
Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
Height Seated (Max) | 2.65mm |
Width | 7.5mm |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Allegro UDN2987LWTR-6-T IC chip is package in Tape & Reel (TR) case. This file is included in package 20-SOIC (0.295, 7.50mm Width). The LED driver is mounted as Surface Mount.The switch type of this switch is General Purpose. Keeping the temperature at -20°C~85°C TA ensures reliable operation. The LED driver has 8 outputs.
In order to operate, UDN2987LWTR-6-T requires a voltage supply of Not Required. There is a maximum output voltage of Bipolar volts. The lighting driver has Status Flag features. I believe it belongs to the UDN2987 family. There are 20 terminations in it.In order to operate, the 20 pins are used.The LED driver has 8 functions. To comply with the operation criteria, the maximum output current is reduced to 350mA. It is possible to achieve a high level of efficiency with a supply voltage of 30V. The lighting driver is mounted in the way of Surface Mount. Allegro UDN2987LWTR-6-T has a total of 20 pins.
UDN2987LWTR-6-T IC chip is set to 350mA in this case. There is a Peripheral Drivers capacity container for this LED driver that is self-contained. In this case, Vsup (maximum supply voltage) is set to 35V. In order to operate normally, the supply voltage (Vsup) must be maintained above 4.75V. There are a total of 1 channels available. A 4.75/35V power supply is used by the part.
Supplied from 30V
1 channels
350 mA output source current
4.75 to 35 V driver supply voltage
Internal ground clamp diodes
Internal Thermal Shutdown (TSD)
Output Breakdown Voltage 35 V minimum
Output enable-disable (OE/R)
Overcurrent protected
TTL, DTL, PMOS, or CMOS compatible inputs
There are a lot of Allegro MicroSystems UDN2987LWTR-6-T Power Switches ICs applications.
Telecom and Network Systems
Portable Music Players
PDAs
Wireless Modem Data Cards
Solid-State Drives
Low Voltage I/O System Power
Set-Top Boxes
Smart Phones, Feature Phones
Handheld Devices
Hot Swaps