UDQ2559B-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-PowerDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | UDQ2559 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Output Current per Channel | 700mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 5.33mm |
| Length | 19.05mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
UDQ2559B-T Overview
The LED driver's packaged as a Tube.This file is included in package 16-PowerDIP (0.300, 7.62mm).This LED driving board is mounted using the mounting type Through Hole.This switch is of type Relay, Solenoid Driver.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has a total of 4 outputs.It uses a supply voltage of 4.75V~5.25V to operate.There is a maximum output voltage of Bipolar volts.The UDQ2559 family contains this object.A total of 16 terminations can be found in it.It is necessary to use the 16 pins in order to operate the LED driver.It is important to note that the LED driving board has 4 functions.In order to meet the operation criteria, the maximum output current drops to 1A.As long as the supply voltage is 5V, high efficiency can be achieved.Through Hole is mounted in the way.16 pins are equipped with it.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In this case, Vsup (maximum supply voltage) is set to 5.25V.This part is powered by 5V.
UDQ2559B-T Features
Supplied from 5V
UDQ2559B-T Applications
There are a lot of Allegro MicroSystems UDQ2559B-T Power Switches ICs applications.
- Hot Swap
- Hot Swaps
- Portable Music Players
- Hot Swap
- Set-Top Boxes
- Low Voltage I/O System Power
- Portable Devices
- PDAs
- Telecom and Network Systems
- Portable Video Game Players
