UDQ2559LB
| Parameters | |
|---|---|
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 80mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Output Characteristics | OPEN-COLLECTOR |
| Output Current per Channel | 700mA |
| Output Polarity | INVERTED |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerSOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDQ2559 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 1A |
UDQ2559LB Overview
As you can see, it's packaged in the way of a Tube.This package is included in 16-PowerSOIC (0.295, 7.50mm Width).Mounting type Surface Mount is selected for the LED driving board.It owns the Relay, Solenoid Driver switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver is equipped with 4 outputs.Operation is based on a supply voltage of 4.75V~5.25V.A maximum output voltage of Bipolar volts can be obtained with this LED driver.It belongs to the family UDQ2559.It consists of 16 terminations in total.In order to operate, 16 pins are used.It consists of 4 functions.The maximum output current drops to 1A in order to meet the operation criteria.With a supply voltage of 5V, high efficiency is possible.It is positioned in the direction of Surface Mount.The LED driving board is equipped with a total of 16 pins.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.This part is powered by 5V.In order to achieve the best efficiency, the supply voltage should be set to 5V.
UDQ2559LB Features
Supplied from 5V
UDQ2559LB Applications
There are a lot of Allegro MicroSystems UDQ2559LB Power Switches ICs applications.
- Hot Swaps
- Solid-State Drives
- Various applications equipped with buttons
- HDD and SSD
- Wireless Headsets
- Handheld Devices
- Hot-Swap Systems
- Portable GPS
- PC Cards
- Low Voltage I/O System Power
