UDQ2559LBTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerSOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDQ2559 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Operating Supply Voltage | 5V |
| Interface | On/Off |
| Nominal Supply Current | 80mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Output Characteristics | OPEN-COLLECTOR |
| Output Current per Channel | 700mA |
| Output Polarity | INVERTED |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDQ2559LBTR Overview
A Tape & Reel (TR) is used to package it.It is included with the 16-PowerSOIC (0.295, 7.50mm Width) package as well.It has been mounted as Surface Mount on the LED driver.Relay, Solenoid Driver is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver has 4 outputs.A supply voltage of 4.75V~5.25V is required for it to operate.A maximum output voltage of Bipolar volts can be obtained with this LED driver.It comes under the family of UDQ2559.It contains 16 terminations.It is necessary to use the 16 pins in order to operate the LED driver.It consists of 4 functions.The maximum output current must drop to 1A to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.In this case, it is mounted in the way of Surface Mount.16 pins are equipped with it.A supply voltage of 5V is recommended for maximum efficiency.
UDQ2559LBTR Features
Supplied from 5V
UDQ2559LBTR Applications
There are a lot of Allegro MicroSystems UDQ2559LBTR Power Switches ICs applications.
- Hot Swaps
- Gaming
- USB3.1 Power Delivery
- Wearable Devices
- HDD and SSD
- USB Ports/Hubs
- USB Protection
- PC Card Hot Swap
- Hot-Swap Systems
- PC Cards
