UDQ2559LBTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerSOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Base Part Number | UDQ2559 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 1A |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Nominal Supply Current | 80mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.75V~5.25V |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Output Current per Channel | 700mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 20 μs |
| Output Peak Current Limit-Nom | 1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
UDQ2559LBTR-T Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 16-PowerSOIC (0.295, 7.50mm Width).This lighting drivere has a mounting type of Surface Mount.It owns the Relay, Solenoid Driver switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has a total of 4 outputs.With a supply voltage of 4.75V~5.25V, the LED driving board operates.There is a maximum output voltage of Bipolar volts on this LED driver.It is part of the UDQ2559 family of LED drivers.It has a total of 16 terminations.For operation, we use the 16 pins.Currently, there are 1 functions associated with the lighting driver.The maximum output current drops to 1A in order to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 16 pins.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In this part, the power supply is set to 5V.When using this LED driving board, it is recommended that the supply voltage is set to 5V.
UDQ2559LBTR-T Features
Supplied from 5V
UDQ2559LBTR-T Applications
There are a lot of Allegro MicroSystems UDQ2559LBTR-T Power Switches ICs applications.
- USB3.1 Power Delivery
- Low Voltage I/O System Power
- PDAs
- Hot Swap
- Smart Phones, Feature Phones
- Smartphone and PDA
- USB Power Distribution
- Telecom and Network Systems
- Solid State Drivers
- Wireless/Networking Cards
